I am trying to install, pre SP1 ver., on a fresh system and am constantly getting an error message as soon as it is done with the initializing and is ready to start the installation. The error states:
“A problem was detected and windows has been shut down to prevent damage…..”
and I will get the technical information:
*** Stop: 0×0000007E (0xC0000005, 0xF748E0BF, 0xF78DA208, 0xF78D9F08)
*** PCI.sys – address F748E0BF base at F7487000, datestamp 3b7d855c
I tried the installation multiple times and every time I got the same error at the same place. I replaced my Video card, removed my sound card, removed my RAM, switched HDD, switched Optical Drives but nothing helped. I will greatly appreciate any help I can get from the tech gurus out there. I have used the same CD multiple times in the past and it worked flawlessly. The last installation I did with that same CD was on an E8400 system last summer and it worked perfectly.
I tried to install Kubuntu 8.10 last night and that installed without any problem, so my hardware is good. But the problem is that I cant use Linux because most of the softwares I use does not support Linux. I was going to install Windows XP first and then was going to upgrade to Vista, but I am stuck for now.
My current rig specs are:
Intel i7 920.
Gigabyte GA-EX58-UD5.
G.Skill 12800 RAM (3GB).
nVidia 9800 GT OC.
Xclio 650W PSU.
Creative Fidelity Soundcard.
HP DVD.
Sony BD-ROM.
Dual WD VelociRap HDD (300GB ea).
No RAID Setup.
Thank you all in advance.
Posts Tagged ‘System’
Unable To Install Windows Xp Pro, On A Fresh System.?
Wednesday, February 10th, 2010System Failure. What Are Other Factors?(in My Case)?
Wednesday, February 10th, 2010Well, i have:
Intel P4 3.0Ghz(HT enabled)
1Gb of RAM(Motherboard supports up to 2Gb)
nVidia FX5500 256MB Memory
3 HDDs:(please ignore the dots)
…Seagate IDE 160Gb (50Gb for Windows XP-frequently used & 110Gb for data)
…Seagate SATA 120Gb (for Data)
…Maxtor 40Gb (for Windows Vista)
…(Therefore, i have 4 drives in “My Computer”: C:, D:, E: & F: )
Motherboard: Asus P5V800-MX(supports Intel Pentium D)
1 CD-ROM
1 CD/DVD+-R/RW
1 expansion card installed(Winfast Global-for recording videos)
I am a massive internet user(I download alot), multi-tasker(surfing the net while copying files, downloading, printing & etc.), data keeper and absolutely NOT a PC gamer – I use my computer for personal use, education and sometimes business. I edit pictures at 3k-20k pixel sizes, create HD videos, making flash, edit sounds, etc.
While watching Eagle Eye movie(copied the file from DVD to HDD) on my XP, my computer restarted on itself. After startup, it showed “recovered from a system failure. A log file has been created” why is that?. I restarted my PC again but, now, it takes more than 30mins loading the startup. I restarted my system again, but this time i used the Vista do some check disks and defrags. I still get the self restart while watching Eagle’s Eye on Vista. I suspected that there should be something wrong. I checked the CPU fan and temp, they’re: 1950-2000RPM and 42C-51C(are these values normal?) or have i just loaded lots of HDDs? or should i need upgrade system: buy new CPU, add more RAMs and buy higher display cards? or is my OS corrupted* and needs a reformat as well as installation?
*Recently, XP showed an error about Dr. Watson(what this?) and then laggs. No errors in my Vista.
Any suggestions, explanations, & tips on how to avoid sys failure? Tnx alot!
What Is “ntdetect.dll” And Where Can I Get It? My System Says It’s Missing.?
Saturday, January 30th, 2010I had to run XP Repair and when my PC booted up I got the message that I’m missing the ntdetect.dll file….and now my system is also running like crap. I’m hoping that the missing file is the only reason. Can anybody explain to me in SIMPLETON style English just what this .dll file is and how I can replace/repair it?
System File Help!!!! I Lost An Important One That Windows Xp Needs!help?
Tuesday, January 19th, 2010Okay, if anyone can help, I’d love it! I just uninstalled some Vista Transformation Pack from Windows X, and when I try to reinstall Windows XP, it wouldn’t work because I was missing a system file! (.sys) Why would’nt it work!? Was it because the Vista Transformation Pack that damaged it bad? Is it permanent? I also had some registry cleaners and error repair software on it, so did those have anything to do with it? How do I fix it!? Help! And if anyone can, tell me what kind of software that harms Windows and damages system files, to avoid if so I can keep my system stable and intact, thx so much! HELP PLZ!?
The System Is Using Generic Video Drivers?
Sunday, January 17th, 2010wanted to play a game but it did not open and gave a generic error… so i Check ‘DxDiag’ and it says: The system is using the generic video driver. Please install video driver provided by the hardware manufacturer. Direct3D functionality not available.
Info:
System: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp.080413-2111)
Language: English (Regional Setting: English)
System Manufacturer: Gateway
System Model: M275
BIOS: Rev 1.0
Processor: Intel(R) Pentium(R) M processor 1.80GHz
Memory: 502MB RAM
Page File: 209MB used, 1019MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
Display Devices
—————
Card name:
Manufacturer:
Chip type:
DAC type:
Device Key: Enum\
Display Memory: n/a
Current Mode: 1024 x 768 (32 bit) (1Hz)
Monitor:
Monitor Max Res:
Driver Name: vga.dll
Driver Version: 5.01.2600.0000 (English)
DDI Version: unknown
Driver Attributes: Final Retail
Driver Date/Size: 7/16/2003 13:49:48, 9344 bytes
WHQL Logo’d: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: vga.sys
Mini VDD Date: 4/13/2008 11:44:40, 20992 bytes
Device Identifier: {D7B70EE0-4340-11CF-B063-282AAEC2C835}
Vendor ID: 0×0000
Device ID: 0×0000
SubSys ID: 0×00000000
Revision ID: 0×0000
Revision ID: 0×0000
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Not Available
D3D Status: Not Available
AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
and when i run this driver http://support.gateway.com/support/drive…
from yahoo answers a software error occured (please repot this to technical support:cannot install intel graphics driver on current graphics device) plz anyone help me i shall to be very thankfull
A System File Is Corrupted And Cannot Be Repaired By Startup Repair. How Can I Copy Over The Corrupted File?
Sunday, January 10th, 2010The file is mup.sys and I want to try to copy over the file with an uncorrupted version. I am using Vista, and want to do the equivalent of a repair install in XP, but I can’t boot into Windows, even in safe mode. Alternatively, I tried to remove my hard drive and connect it via usb adapter to another computer to copy an uncorrupted mup.sys, but there is always a vista permissions error that will not let me copy over the file. Is there a way to copy over a corrupt file? I have the Vista DVD.
Illegal System Dll Relocation? What Is That?
Saturday, January 9th, 2010I received this message:
“The system DLL user32.dll was relocated in memory. The application will not run properly. The relocation occurred because the DLL C:\WINDOWS\system32\SHELL32.dll occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.”
I cannot open the calculator and my Creative Media Player is not working properly, what is wrong?
System Cannot Find //dri_kbfiltr Wat Do U Do Other Than A Reboot!?
Wednesday, January 6th, 2010sometimes as windows starts it says the system cant find the file specified .its a keyboard driver i think ,and the keyboard neither works nor shows up in device manager when ever that error message shows up.its at system32/drivers/kbfiltr.sys ..but how do i tell windows that its there! …all i do is reboot and press the del key to enter the bios .(i think the computer is more sensitive to the del key!).return to windows (without making changes)..and it works.how?
Windows System Error Msmsgr.exe?
Saturday, January 2nd, 2010hello!!
i really need help!my laptop is becoming slower,crazier!!and abnormal!
each time i open it i get an error called msmsgfr.exe i have to click on enter to make the system works!
this error has reached msn which doesn’t want to open :s
i desinstalled msn several times and the same error occurs
is there any solution ??i dont want to format my laptop !
please help 
Please Help -windows Xp, My System Is Dead?
Friday, December 25th, 2009Today morning when I am on my desktop, error comes on screen SYSTEM32/DRIVERS/PCI.SYS corrupt or missing and my system did not start.
When I restall the Windows XP SP2 from copyrighted CD
Setup is inspecting your computer hardware then blue screen comes of Windows Setup
Then massage is
File setupdd.sys Could not ne loaded
The Error code is 4
Setup can not continue, Press any key to exit.
I am change windows xp copywrited cdmassagessege is still comes