error ingarbage The instrucation at “0×6600accc”. The memory could not be”read”.
click on OK to terminate the program
Posts Tagged ‘Problem’
Problem In My Computer Iexplorer.exe -application Error?
Thursday, February 11th, 2010Problem With Xp Home/kaspersky Av/bsod?
Tuesday, February 9th, 2010Hi I am having a problem with a computer. Whenever I turn it on it shows the Dell Splash screen, the Then the Windows XP Home logo with the loading bar, and after like 3 or so completions on the load bar I get a Blue Screen.
I have narrowed this down to Kaspersky Antivirus… I cannot load into Safemode either, it gives me the same error. I tried to put in the windows xp disk and run a chkdsk but that didn’t help either.
Here is more information about the error:
The Problem seems to be caused by the following file: klif.sys
Technical information
Stop: 0×000000D4 (0xF8AD9938, 0×000000FF, 0×00000001, 0×80516D7F)
Is there anything I can do short of reinstalling windows?
Problem With Installing Xp?
Monday, February 8th, 2010when i try install xp i get an error saying
Technical Information:
Stop:0×0000007E (0xC0000005,0xF748E0BF,0xF78DA208, 0xF7809F08)
pci.sys – Adress F748E0BF base at F7487000, Datestamp 3b7d855c
and it also tells me to check for BIOS updates and to disable BIOS memory options such as caching or shadowing.
my laptop is a toshiba satellite L300D that had vista
anybody know how to fix this?
Reformat Windows Xp Problem?
Thursday, February 4th, 2010how come when i try to reformat my windows xp it says
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time(happens all the time) you’ve seen this stop error screen restart your computer (which i did reappears again). If this screen appears again, follow these steps:
Check for virus on your computer. Remove any newly installed hard drives or hard drives controllers. Check your hard drive Run chkdsk/f to check for hard drive corruption, and then restart your computer.
What is swenum.sys because it says setup cannont copy the file: swenum.sys,file sysaudio.sys, file swmidi.sys, driver.cab, sonydcam.sys, srgb.icm, stream.sys, streamci.dll, and thats all when i try to reformat it or like something to do with copying…how can i fix these
Another thing is when it is install windows after rebooting my computer (an exicting new look) it just restart over and over… and never stop and sometimes it turns into a black screen and i can’t do anything to it. i have to reformat my whole computer again by clicking f12 and it won’t work…
i can’t go to my desktop and or anything i only can go to windows set up and try to reformat please help me
Also can you give me a list of steps what i should do to reformat my windows xp
Lastly do i have to unplug my spears and internet and wireless internet stuff when doing this i don’t know please help
Hi All, I Get Problem To Install Ns-allinone-2.1b9a-gcc32.tar.g… In Fedora 9. Tclcl-1.0b12 Make Failed! ?
Saturday, January 30th, 2010Hi all,
I get problem to install ns-allinone-2.1b9a-gcc32.tar.gz
in fedora 9. tclcl-1.0b12 make failed! the detail here it is below.
Is there any one have an idea to fix this problem?
please write me.
thank you,
======================================…
* Build Tclcl-1.0b12
======================================…
No .configure file found in current directory
Continuing with default options…
checking build system type… i686-pc-linux-gnu
checking host system type… i686-pc-linux-gnu
checking target system type… i686-pc-linux-gnu
checking for gcc… gcc
checking for C compiler default output… a.out
checking whether the C compiler works… yes
checking whether we are cross compiling… no
checking for executable suffix…
checking for object suffix… o
checking whether we are using the GNU C compiler… yes
checking whether gcc accepts -g… yes
checking for g++… g++
checking whether we are using the GNU C++ compiler… yes
checking whether g++ accepts -g… yes
checking how to run the C preprocessor… gcc -E
checking for ANSI C header files… yes
checking for string.h… yes
checking for main in -lXbsd… no
checking for socket in -lsocket… no
checking for gethostbyname in -lnsl… yes
checking for dcgettext in -lintl… no
checking for getnodebyname in -ldnet_stub… no
checking that g++ can handle -O2… no
checking standard STL is available… no
checking for ranlib… ranlib
checking for snprintf… yes
checking for ANSI C header files… (cached) yes
checking for strtoq… yes
checking for strtoll… yes
checking for sys/types.h… yes
checking for sys/stat.h… yes
checking for stdlib.h… yes
checking for string.h… (cached) yes
checking for memory.h… yes
checking for strings.h… yes
checking for inttypes.h… yes
checking for stdint.h… yes
checking for unistd.h… yes
checking for long… yes
checking size of long… 4
checking for __int64_t… no
checking for long long… yes
checking for int64_t… yes
checking which kind of 64-bit int to use… int64_t
checking for tcl.h… -I../include
checking for libtcl8.3… -L../lib -ltcl8.3
checking for init.tcl… ../lib/tcl8.3
checking for tclsh8.3.2… no
checking for tclsh8.3… ../bin/tclsh8.3
checking for tk.h… -I../include
checking for libtk8.3… -L../lib -ltk8.3
checking for tk.tcl… ../lib/tk8.3
checking for otcl.h… -I../otcl-1.0a8
checking for libotcl1.0a8… -L../otcl-1.0a8 -lotcl
checking for X11 header files
checking for X11 library archive
checking for XOpenDisplay in -lX11… yes
checking for XShmAttach in -lXext… yes
No explicit static compilation flag; setting V_STATIC to “”
checking for dlopen in -ldl… yes
checking for a BSD compatible install… /usr/bin/install -c
configure: creating ./config.status
config.status: creating Makefile
rm -f embedded-tcl.cc
./tcl2c++ et_tcl ../lib/tcl8.3/init.tcl ../lib/tcl8.3/history.tcl ../lib/tcl8.3/word.tcl ../lib/tcl8.3/http2.3/http.tcl > embedded-tcl.cc
./tcl2c++: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory
make: *** [embedded-tcl.cc] Error 127
tclcl-1.0b12 make failed! Exiting …
See http://www.isi.edu/nsnam/ns/ns-problems.html for problems
There Is An Error Coming Nmindexstoresvr.exe Has Encountered A Problem And Needs To Close?
Saturday, January 23rd, 2010please help me with this error thank u
Problem Burning Dvd’s With Dvd Shrink?
Friday, January 22nd, 2010lately i have had some problems burning with dvd shrink. It will encode fine but when it starts to burn i recive a burn process failed. im using nec nd-3550-a burner with sony dvd + discs.
here is the log
user
1A20-0100-0000-2615-0120-4899
Windows XP 5.1
IA32
WinAspi: File ‘Wnaspi32.dll’: Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 1:06:00 PM
ahead WinASPI: File ‘C:\Program Files\Ahead\nero\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: Version: 1.05 – HA 1 TA 1 – 6.6.0.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: Version: 9S15 – HA 1 TA 0 – 6.6.0.15
Adapter driver: HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A IdeChnDr Port 0 ID 0 DMA: On
DiskPeripheral : ST34311A IdeChnDr Port 0 ID 1 DMA: Off
CdRomPeripheral : LITE-ON DVD SOHD-167T IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3550A IdeChnDr Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVD SOHD-167T D: CDRom0
_NEC DVD_RW ND-3550A F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (522032kB)
Free physical memory: 140MB (144284kB)
Memory in use : 72 %
Uncached PFiles: 0×0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.8.2006
UDF/ISO compilation
12:28:15 AM#1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
12:28:15 AM#2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
12:28:15 AM#3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
————————————–…
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:28:15 AM#4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
12:28:15 AM#5 Text 0 File Reader.cpp, Line 127
Reader running
12:28:15 AM#6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-3550A running
12:28:15 AM#7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0×00000000)
12:28:15 AM#8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0×00000000)
12:28:15 AM#9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
12:28:16 AM#10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
12:28:16 AM#11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
12:28:16 AM#12 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+R
12:28:16 AM#13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: << TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [_NEC DVD_RW ND-3550A]
————————————–…
12:28:16 AM#15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0×00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0×00, FilePos 0 0 4681990144, ISRC “”
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_Rec…
0 | lead-in | 0 | 0×41 | 0×00
0 | 1 | 0 | 0×41 | 0×00
0 | 1 | 1 | 0×41 | 0×00
2286128 | lead-out | 1 | 0×41 | 0×00
12:28:16 AM#16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:28:16 AM#17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
12:28:16 AM#18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:28:16 AM#19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (22,160 KB/s)
12:28:16 AM#20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:28:16 AM#21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0×0B990600
Status: 0×04 (0×01, SCSI_ERR)
HA-Status 0×00 (0×00, OK)
TA-Status 0×02 (0×01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0×05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0×24
Sense Qual: 0×00
CDB Data: 0xAD 0×00 0×00 0×00 0×00 0×00 0×00 0×00 0×08 0×04 0×00 0×00
Sense Data: 0×70 0×00 0×05 0×00 0×00 0×00 0×00 0×0A
0×00 0×00 0×00 0×00 0×24 0×00
12:28:16 AM#22 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0×03815000
Status: 0×04 (0×01, SCSI_ERR)
HA-Status 0×00 (0×00, OK)
TA-Status 0×02 (0×01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0×05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0×20
Sense Qual: 0×00
CDB Data: 0xFA 0×10 0×00 0×00 0×00 0×00 0×00 0×00 0×06 0×00 0×00 0×00
Sense Data: 0×70 0×00 0×05 0×00 0×00 0×00 0×00 0×0A
0×00 0×00 0×00 0×00 0×20 0×00
12:28:16 AM#23 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0×03815000
Status: 0×04 (0×01, SCSI_ERR)
HA-Status 0×00 (0×00, OK)
TA-Status 0×02 (0×01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0×05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0×20
Sense Qual: 0×00
CDB Data: 0xFA 0×10 0×00 0×00 0×00 0×00 0×00 0×00 0×06 0×00 0×00 0×00
Sense Data: 0×70 0×00 0×05 0×00 0×00 0×00 0×00 0×0A
0×00 0×00 0×00 0×00 0×20 0×00
12:28:16 AM#24 Text 0 File DVDPlusRW.cpp, Line 663
Start write address at LBA 0
DVD high compatibility mode: Yes
12:28:44 AM#25 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0×0B2E0000
Status: 0×04 (0×01, SCSI_ERR)
HA-Status 0×00 (0×00, OK)
TA-Status 0×02 (0×01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0×03 (KEY_MEDIUM_ERROR)
Sense Code: 0×73
Sense Qual: 0×03
CDB Data: 0×2A 0×00 0×00 0×00 0×00 0×00 0×00 0×00 0×20 0×00 0×00 0×00
Sense Data: 0×70 0×00 0×03 0×00 0×00 0×00 0×00 0×0A
0×00 0×00 0×00 0×00 0×73 0×03
12:28:44 AM#26 CDR -1106 File Writer.cpp, Line 311
Power calibration error
12:28:44 AM#27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:28:44 AM#28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:28:44 AM#29 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
12:28:45 AM#30 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
12:28:45 AM#31 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0×03815000
Status: 0×04 (0×01, SCSI_ERR)
HA-Status 0×00 (0×00, OK)
TA-Status 0×02 (0×01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0×05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0×20
Sense Qual: 0×00
CDB Data: 0xFA 0×10 0×00 0×00 0×00 0×00 0×00 0×00 0×06 0×00 0×00 0×00
Sense Data: 0×70 0×00 0×05 0×00 0×00 0×00 0×00 0×0A
0×00 0×00 0×00 0×00 0×20 0×00
12:28:45 AM#32 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0×03815000
Status: 0×04 (0×01, SCSI_ERR)
HA-Status 0×00 (0×00, OK)
TA-Status 0×02 (0×01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0×05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0×20
Sense Qual: 0×00
CDB Data: 0xFA 0×10 0×00 0×00 0×00 0×00 0×00 0×00 0×06 0×00 0×00 0×00
Sense Data: 0×70 0×00 0×05 0×00 0×00 0×00 0×00 0×0A
0×00 0×00 0×00 0×00 0×20 0×00
12:28:45 AM#33 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File ‘Drivers\CDRALW2K.SYS’: Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File ‘Drivers\ASPI32.SYS’: Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 1:06:00 PM
File ‘Drivers\PXHELP20.SYS’: Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
File ‘Drivers\IdeChnDr.sys’: Ver=2.3.0.2160, 10/01/2002, size=101431 bytes, created 10/15/2002 1:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROM… : 0 (Security Option)
Couldn’t Burn Dvd Mp3 With Nero What Do You Think Is The Problem?
Tuesday, January 19th, 20105C82001080100000000939548639
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File ‘C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll’: Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: Version: TS01 – HA 1 TA 0 – 7.0.1.2
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected – recorder class: Std. MMC recorder
CD-ROM: Version: 1.0 – HA 1 TA 1 – 7.0.1.2
Adapter driver: HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162D atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00CRA1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : YE3694W UAH410B 1.0 dtscsi Port 3 ID 0 DMA: Off
CdRomPeripheral : YE3694W UAH410B 1.0 dtscsi Port 3 ID 1 DMA: Off
CdRomPeripheral : YE3694W UAH410B 1.0 dtscsi Port 3 ID 2 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-W162D D: CDRom0
YE3694W UAH410B E: CDRom1
YE3694W UAH410B F: CDRom2
YE3694W UAH410B G: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523056kB)
Free physical memory: 80MB (82484kB)
Memory in use : 84 %
Uncached PFiles: 0×0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.11.2006
ISO compilation
1:57:57 AM#1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
————————————–…
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:57:57 AM#2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
1:57:57 AM#3 Text 0 File Reader.cpp, Line 124
Reader running
1:57:57 AM#4 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW SH-W162D running
1:57:57 AM#5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0×00000000)
1:57:57 AM#6 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
1:58:06 AM#7 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 351087 ( 78:01.12, 685MB)
1:58:06 AM#8 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
1:58:06 AM#9 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: TSSTcorp CD/DVDW SH-W162D, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
1:58:06 AM#10 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: << TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 350528 blocks [D: TSSTcorp CD/DVDW SH-W162D]
————————————–…
1:58:06 AM#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW SH-W162D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: “”
TOCType: 0×00; Session Closed, disc not fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0×00, FilePos 0 0 717881344, ISRC “”
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_Rec…
560 | lead-in | 0 | 0×41 | 0×00
560 | 2 | 0 | 0×41 | 0×00
560 | 2 | 1 | 0×41 | 0×00
351088 | lead-out | 1 | 0×41 | 0×00
1:58:06 AM#13 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume – completed successfully for FCTL_LOCK_VOLUME
1:58:06 AM#14 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
1:58:06 AM#15 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
1:58:06 AM#16 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
1:58:06 AM#17 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 16x (22,160 KB/s)
1:58:06 AM#18 SPTI -1066 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0×05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0×24
Sense Qual: 0×00
CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
Sense Area: 0×70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x079db000: Len x4000
1:58:06 AM#19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #560
1:58:06 AM#20 Text 0 File Cdrdrv.cpp, Line 8411
—- DVD Structure: Physical Format Information (00h) —-
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY….
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 – 00 00 00 44 32 31 00 38 …SONY….D21.8
23 54 00 00 00 00 00 00 – 00 00 00 00 00 00 00 00 #T…………..
00 00 00 00 00 00 00 00 – 00 00 00 00 00 00 00 00 …………….
1:58:06 AM#21 Text 0 File Cdrdrv.cpp, Line 8411
—- DVD Structure: Physical Format Information (00h) —-
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY….
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 – 00 00 00 44 32 31 00 38 …SONY….D21.8
23 54 00 00 00 00 00 00 – 00 00 00 00 00 00 00 00 #T…………..
00 00 00 00 00 00 00 00 – 00 00 00 00 00 00 00 00 …………….
1:58:06 AM#22 Text 0 File Cdrdrv.cpp, Line 8411
—- DVD Structure: Physical Format Information (00h) —-
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY….
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 – 00 00 00 44 32 31 00 38 …SONY….D21.8
23 54 00 00 00 00 00 00 – 00 00 00 00 00 00 00 00 #T…………..
00 00 00 00 00 00 00 00 – 00 00 00 00 00 00 00 00 …………….
1:58:06 AM#23 Text 0 File DVDR.cpp, Line 7068
Drive: TSSTcorp CD/DVDW SH-W162D
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
1:58:06 AM#24 CDR -1207 File DVDR.cpp, Line 5330
Book Type automatically set to: DVD-ROM
1:58:06 AM#25 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 560
DVD high compatibility mode: No
1:59:23 AM#26 SPTI -1135 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0×03 (KEY_MEDIUM_ERROR)
Sense Code: 0×0C
Sense Qual: 0×00
CDB Data: 0×2A 00 00 00 04 10 00 00 20 00 00 00
Sense Area: 0×71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x04920000: Len x10000
0×87 42 EC BE D6 31 F3 F2 2F 24 55 FB 94 86 D6 DB
0×52 96 DF 6E A2 71 4A 64 74 44 1C FE F3 11 5B 99
0×91 F4 BC BE 95 00 00 73 23 21 C3 29 41 E3 11 C2
1:59:23 AM#27 CDR -1135 File Writer.cpp, Line 302
Write error
D: TSSTcorp CD/DVDW SH-W162D
1:59:24 AM#28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:59:25 AM#29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:00:13 AM#30 SPTI -1176 File SCSIPassThrough.cpp, Line 323
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0×03 (KEY_MEDIUM_ERROR)
Sense Code: 0×72
Sense Qual: 0×01
CDB Data: 0×51 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0×71 00 03 00 00 00 00 0A 00 00 00 00 72 01
Buffer x03a5ae00: Len x20
2:00:13 AM#31 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
D: TSSTcorp CD/DVDW SH-W162D
2:00:13 AM#32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
2:00:14 AM#33 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File ‘Drivers\PXHELP20.SYS’: Ver=2.03.32a, size=20640 bytes, created 7/27/2006 11:28:33 AM (Prassi/Veritas driver for win 2K)
File ‘Drivers\scsiport.sys’: Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROM… : 0 (Security Option)
Transformers.exe Has Encountered A Problem Error.?
Monday, January 18th, 2010Hello guys.
i am playing Transformers – The Game (Ist part)
while playing chapter three “Under Hoover Dam”
when i transformer to car or after some time the game stops and
says “transformers.exe has encountered an error” – and needs to be closed .
can any one tell me what should i do.
please help.
What Is The Occache.dll And How Can I Fix Its Problem?
Friday, January 15th, 2010Every time I try to do a google search, or any search for that matter, my internet shuts down and i get a box that reads “Application must be terminated (or something along those lines) OCCACHE.dll has not been found. Re-installing the application may fix the problem”. What is this, and how can I fix it?
Oh, and my computer is a Dell Dimension desktop…I have windows XP