Whats strange is that I’m using programs that require Directx 9c. I suspect that it might be installed but is somehow not showing in Dxdiag. Under the files tab in DXdiag is says “The file gcdef.dll is an old version, which could cause problems.” I imagine updating Directx should fix this, I hope, but as I mentioned I am unable to install 9.0c. It fails each time and says “An internal system error has occured. Please refer to dxerror.log and directx.log in your Windows folder to determine the problem” I will include my dxdiag report as well as the directx.log if that helps. I want to solve this issues because I believe problems with directx are preventing me from installing updated gfx card drivers, which I badly need. If anyone can help, I would be so very appreciative. Please include links to sites, etc. that I can browse to for help/info. I’ve looked all over on the web searching for almost every directx term/error I can think of, and thus far Ive had little (none) success. Thanks=)
DxDiag report:
——————
System Information
——————
Time of this report: 10/1/2009, 05:52:52
Machine name: AEGIS
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
Language: English (Regional Setting: English)
System Manufacturer: n/a
System Model: n/a
BIOS: Award Modular BIOS v6.0
Processor: Intel(R) Celeron(R) CPU 2.40GHz
Memory: 2048MB RAM
Page File: 431MB used, 3512MB available
Windows Dir: C:\WINDOWS
DirectX Version: Not found
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
————
DxDiag Notes
————
DirectX Files Tab: The file gcdef.dll is an old version, which could cause problems.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
——————–
DirectX Debug Levels
——————–
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
—————
Display Devices
—————
Card name: ATI Radeon HD 3850
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter AGP (0×9515)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9515&SUBSYS_002817…
Display Memory: 512.0 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6869 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/3/2008 17:40:50, 311296 bytes
WHQL Logo’d: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 10/3/2008 18:29:30, 3331584 bytes
Device Identifier: {D7B71EE2-D655-11CF-E26E-2220A1C2CB35}
Vendor ID: 0×1002
Device ID: 0×9515
SubSys ID: 0×00281787
Revision ID: 0×0000
Revision ID: 0×0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_A ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
————-
Sound Devices
————-
Description: SoundMAX D
Posts Tagged ‘Installation’
I Cant Install Directx 9.0c.the Installation Fails Each Time. I’ve Run Dxdiag, And It Says Directx Not Found.?
Saturday, February 27th, 2010I Cant Install Directx 9.0c.the Installation Fails Each Time. I’ve Run Dxdiag, And It Says Directx Not Found.?
Saturday, February 27th, 2010Whats strange is that I’m using programs that require Directx 9c. I suspect that it might be installed but is somehow not showing in Dxdiag. Under the files tab in DXdiag is says “The file gcdef.dll is an old version, which could cause problems.” I imagine updating Directx should fix this, I hope, but as I mentioned I am unable to install 9.0c. It fails each time and says “An internal system error has occured. Please refer to dxerror.log and directx.log in your Windows folder to determine the problem” I will include my dxdiag report as well as the directx.log if that helps. I want to solve this issues because I believe problems with directx are preventing me from installing updated gfx card drivers, which I badly need. If anyone can help, I would be so very appreciative. Please include links to sites, etc. that I can browse to for help/info. I’ve looked all over on the web searching for almost every directx term/error I can think of, and thus far Ive had little (none) success. Thanks=)
DxDiag report:
——————
System Information
——————
Time of this report: 10/1/2009, 05:52:52
Machine name: AEGIS
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
Language: English (Regional Setting: English)
System Manufacturer: n/a
System Model: n/a
BIOS: Award Modular BIOS v6.0
Processor: Intel(R) Celeron(R) CPU 2.40GHz
Memory: 2048MB RAM
Page File: 431MB used, 3512MB available
Windows Dir: C:\WINDOWS
DirectX Version: Not found
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
————
DxDiag Notes
————
DirectX Files Tab: The file gcdef.dll is an old version, which could cause problems.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
——————–
DirectX Debug Levels
——————–
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
—————
Display Devices
—————
Card name: ATI Radeon HD 3850
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter AGP (0×9515)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9515&SUBSYS_002817…
Display Memory: 512.0 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6869 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/3/2008 17:40:50, 311296 bytes
WHQL Logo’d: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 10/3/2008 18:29:30, 3331584 bytes
Device Identifier: {D7B71EE2-D655-11CF-E26E-2220A1C2CB35}
Vendor ID: 0×1002
Device ID: 0×9515
SubSys ID: 0×00281787
Revision ID: 0×0000
Revision ID: 0×0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_A ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
————-
Sound Devices
————-
Description: SoundMAX D
I Cant Install Directx 9.0c.the Installation Fails Each Time. I’ve Run Dxdiag, And It Says Directx Not Found.?
Friday, February 26th, 2010Whats strange is that I’m using programs that require Directx 9c. I suspect that it might be installed but is somehow not showing in Dxdiag. Under the files tab in DXdiag is says “The file gcdef.dll is an old version, which could cause problems.” I imagine updating Directx should fix this, I hope, but as I mentioned I am unable to install 9.0c. It fails each time and says “An internal system error has occured. Please refer to dxerror.log and directx.log in your Windows folder to determine the problem” I will include my dxdiag report as well as the directx.log if that helps. I want to solve this issues because I believe problems with directx are preventing me from installing updated gfx card drivers, which I badly need. If anyone can help, I would be so very appreciative. Please include links to sites, etc. that I can browse to for help/info. I’ve looked all over on the web searching for almost every directx term/error I can think of, and thus far Ive had little (none) success. Thanks=)
DxDiag report:
——————
System Information
——————
Time of this report: 10/1/2009, 05:52:52
Machine name: AEGIS
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
Language: English (Regional Setting: English)
System Manufacturer: n/a
System Model: n/a
BIOS: Award Modular BIOS v6.0
Processor: Intel(R) Celeron(R) CPU 2.40GHz
Memory: 2048MB RAM
Page File: 431MB used, 3512MB available
Windows Dir: C:\WINDOWS
DirectX Version: Not found
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
————
DxDiag Notes
————
DirectX Files Tab: The file gcdef.dll is an old version, which could cause problems.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
——————–
DirectX Debug Levels
——————–
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
—————
Display Devices
—————
Card name: ATI Radeon HD 3850
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter AGP (0×9515)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9515&SUBSYS_002817…
Display Memory: 512.0 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6869 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/3/2008 17:40:50, 311296 bytes
WHQL Logo’d: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 10/3/2008 18:29:30, 3331584 bytes
Device Identifier: {D7B71EE2-D655-11CF-E26E-2220A1C2CB35}
Vendor ID: 0×1002
Device ID: 0×9515
SubSys ID: 0×00281787
Revision ID: 0×0000
Revision ID: 0×0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_A ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
————-
Sound Devices
————-
Description: SoundMAX D
Windows Xp Problem. The Dll File Are Missing After Installation Of Xp Within 2 Days Or A Week?
Thursday, February 25th, 2010sometimes win 32 error message is displayed.
Kaspersky Anti-virus 7.0 Installation?
Monday, February 1st, 2010when i try to install it i get…
“error 1304 writing to file
c:\windows\system32\drivers\kl1.sys. verify that you have access to that folder”
please help me
thanks
How Do I Restore A Msvcrt.dll File Without My Windows98 Installation Disc?
Wednesday, January 6th, 2010Please explain in the simplest terms. I need my computer for work and the internet keeps crashing on me. Should I delete all other msvcrt.dll files after I fix this?
I Have This Error After Installation Of Royalcalls.exe “error To Load Skin”.pls Help Me How To Fix It???
Friday, December 25th, 2009it is spyware on your computerhttp://spywarefiles.prevx.com/spywarefil…
Here get some free antispywarehttp://www.spywaredata.com/spyware/resul…
Which Is This Virus?? No Paste, No Photo Viewer, No Installation Of Antivirus…..?
Thursday, December 17th, 2009I have recently got some problem with my computer. I have lost the stability of the computer.
I cant open pictures file as my WINDOWS PICTURE & FAX VIEWER doesn’t open. Moreover, I can’t paste anything anywhere. Although I can copy or cut but while pasting my explorer shows NOT RESPONDING. And my desktop shows ACTIVE DESKTOP RECOVERY Screen.
When I run MEDIA PLAYER CLASSIC, I get the following error. MICROSOFT VISUAL C++ RUNTIME LIBRARY (R6002)-floating point not loaded.
I also can’t run FILEMON.EXE
My computer doesn’t goto SAFE MODE. After loading MUP.SYS, it restart again with error COMPUTER CANT BE STARTED DUE TO POWER FAILURE OR OTHER PROBLEMS.
I currently have been infected my IPH.EXE but I manually deleted it myself.
Ever after re-installing new windows XP by formating C:, still I have same problem. My be becaure I run other drive after it as my documents, programs, drivers are all in other drive.
I cant install some programs as it shows MICROSOFT INSTALLER ERROR. And to antivirus. Not of them got installed. Although, Kaspersky 7.0 and AVG got installed but both didn’t run. It got closed before installation process was completed.
So please help.
Windows Xp Installation Problem Continued.?
Thursday, November 26th, 2009Further to my last question on this subject I Have Just Placed my Hardrive into another PC to Install my Windows XP It Seems OK on this other PC. BUT Not on the Original one.. When I get the Windows Loading Logo start the PC just switches off for a Restart from the Dos Screen with the Options of Start Windows Normally Or Safe Mode Or Last Known Configuration etc. Any suggestion with Help here Please? AND Thanks for all those who have tried to help me Last week with my Original Question A Couple DID look promising then Only to get the Same error message “setupdd.sys” maybe the Problem. PAGE_FAULT_IN NONPAGE_AREA.