fix computer errors » Help

Help Urgent Please Help Error Message On Windows 2000 (read Please)?

florian — Tue, 13 Jul 2010 04:36:29 +0000

ok so when I turn on my computer, I enter my username and password and I will get a blue screen and a message : Winmgmt.exe – Aplication Error
The aplication failed to initialize properly (0xc0000005). Click on OK to terminate application.
so I do but my files and start bar etc never load and I have to shut it down manually… and after a while the message appears again.
PLEASE help I’m using my bro’s computer right now and I need to do stuff on mine

Need Help!; Tried To Uninstall Avg As I Believed Agsssie.exe Was Interfering With Printer Spool, And It Would?

florian — Mon, 12 Jul 2010 22:38:59 +0000

not uninstall; gave message:
“Local machine: installation failed Installation:Error: Action failed for file aAvgApi.exe: creating backup….Error 0×80070020 %DESTINATION% = “C:\Program Files\AVG\AVG8\aAvgApi.exe.install_backu… %SOURCE% = “C:\Program Files\AVG\AVG8\aAvgApi.exe”Error 0×80004004″

Computer Problem! Need Help!?

florian — Sun, 28 Feb 2010 18:01:54 +0000

I have no clue of what happened but the laptop was working fine when i turned it off on Friday. But when i turned it on today i keep one getting a Stop:0×0000007e error
————————————–…
[COLOR=Blue]A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you’ve seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try chaging video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical Information:
*** STOP: 0×0000007E [/COLOR]
————————————–…
Thats pretty much the message im getting no matter what i do?
I already tried starting in best last known config, debug mode, and it wont load it safe mode
actually when i load it in safe mode i starts to load but the freezes when loading Mup.sys
It wont let me reinstall windows either
when i but in the disk…it loads everything but when its ready to install..i get the same message as above…

Winlogon.exe Application Error – Please Help Me?

florian — Sat, 27 Feb 2010 16:37:01 +0000

Everytime i switch on my computer i get this error notification – “The instruction at 0*00000000 referenced memory at 0*00000000. The memory could not be read.
It doesn’t matter if i click OK or Cancel, my computer reboots and i get the same message again.
I tried to find a solution online. Even downloaded a registry repair software and fixed 700+ errors. But this one still persists. The instructionson microsoft.com are either useless or too complicated to understand. Will i have to reinstall Windows XP? I think i’ll lose all my data if i do that, right? Is there anyother way to fix this problem?

Hi Guys! Help Me To Fix Warcraft 3 Because The Error Is Not Find War3.exe In The Cd-rom?

florian — Fri, 26 Feb 2010 10:40:08 +0000

after install my warcraft cd is complete no problem error but after update to battle net then restart to finnish then i start to play i click icon the warcraft the happen is not running… because not find the cd of warcrft but i have …

Need Desperate Computer Help Please.?

florian — Tue, 23 Feb 2010 18:01:49 +0000

I would first like to start off by saying that I’m only fourteen and I’m not too technically savvy. So I ask that if you are going to help me and give me a solution to my problem, that you be descriptive and clear so I can understand it.
I have a three-year-old Sony Vaio desktop that I’ve had for about a year now. It was given to me by a friend of my brother and since I’ve gotten it, it’s always ran kind of sluggish. But it worked and I could do everything on it so I thought nothing of it.
Starting in mid-July, I would occasionally get a BSOD error when I would start up my computer. All I had to do was restart and it would work fine; but the errors kept becoming more frequent and seemed to occur in a pattern.
The BSODs stopped in September (That’s when I started school and wasn’t on my computer as often) but recently began again. Now my computer won’t even start up anymore and all I get is the same BSOD no matter what I do. I can’t even boot it up in Safe Mode.
This is what I managed to remember from the blue screen:
IRQL_NOT_LESS_OR_EQUAL
0×0000000D1
And after attempting to boot it up a few times, the text ‘NDIS.SYS’ appeared towards the bottom along with other numbers and stuff.
Can anyone help me out and give a diagnosis/solution for my problem? And please don’t give me download links for any diagnosis programs because I obviously can’t get it on my computer.
Thank you so very for your help.

Iexplore.exe-application Error….need Help?

florian — Sat, 20 Feb 2010 22:40:02 +0000

a box keeps coming up on my screen..it reads as follows the instruction at “ox74985c91″ referenced memory at “Ox00000000″. the memory could not be “read” click on ok to terminate the programme..wich i do but it still comes back again..can anyone help me to get rid of this or to repair the error..the only mistake i made was to run reg clean but i have now taken it off my computer but i dont know if it was reg clean that caused this problem…i would be grateful for any help and advice

I Need Help With Gateway Mx3230?

florian — Sat, 20 Feb 2010 12:01:48 +0000

I have a Gateway MX3230 With 1.5 Ghz and 256 RAM. It use to run Perfectly Fine up until maybe 2 weeks ago. It Shutdown After something blue pop ed up. Then It restarted and same thing happened Before i could see the desktop. I restored it with a brand new Restore disk, but it Freezes up on certain things then after 3-4 days the blue message saying memory dump happens again. I restored and tried Error reading disk to see if there was something bad with the hard drive. Nothing pop ed up saying anything wrong with it. So then 1 day later i tried to install Service pack 3 in which it failed to install. Then the computer would not reboot after the windows XP loading screen. So i restored again. I have installed XP pro with sp1 and it ran fine but for some reason it would mess up when i tried to install my video acceleration driver from gateway updates. It would say Installshield could not work errorssomethingg somthing. So i restored with Gateway disk sense XP pro was not helping at all. Now when i try to restore it keeps saying it could not find certain files. Which when i try to restore over and over again it says it cant find different files each time. But i found out that i could find the files in system32. So i did that and it did fine the after its all done with 65/65 patches a screen comes up after a programbeginningg with SYS. in which the screen says windows xp hone edition up top in the middle says please wait bottom it says like copyright. So the computer seems to be doing somthing sense the light for when the hard drive is being used flashes, But it stays that way i left it for 8 hours. So i restarted the pc and a popup comes up saying the system is not fully installed. so i click ok and system rebbots and same error comes up. Can anywon help me?

Help! Sound Card Issues.?

florian — Fri, 19 Feb 2010 18:05:04 +0000

I’ve just downloaded the Dell 1501 Sigmatel sound driver for XP SP2, and it tells me, after I’ve unzipped it, “Exit error: error: Device Object not present. Please restart system and try again.”
But I’ve restarted four times. Please help?
Here is my system info:
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Build 2600
OS Manufacturer Microsoft Corporation
System Name AMY
System Manufacturer Dell Inc.
System Model Inspiron 1501
System Type X86-based PC
Processor x86 Family 15 Model 76 Stepping 2 AuthenticAMD ~1795 Mhz
BIOS Version/Date Dell Inc. 1.4.0, 11/14/2006
SMBIOS Version 2.4
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\System32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = “5.1.2600.0 (xpclient.010817-1148)”
User Name AMY\am
Time Zone Eastern Standard Time
Total Physical Memory 512.00 MB
Available Physical Memory 103.83 MB
Total Virtual Memory 1.47 GB
Available Virtual Memory 674.11 MB
Page File Space 1.03 GB
Page File C:\pagefile.sys
(I am very nearly computer-illiterate, so a for-idiots answer would be appreciated.)

Can Anyone Help? When My Computer Loads Up An Error Message Shows Up (mfc71.dll) What Is This?

florian — Fri, 19 Feb 2010 11:40:04 +0000

you can download it from herehttp://www.dll-files.com/dllindex/dll-fi…
unzip and and save it in
c: \windows\system32
folder