How Do I Register Dx8vb.dll With Regsvr32.exe?

February 27th, 2010

I know I’m supposed to enter something to ‘Run’ but I’m clueless, here.

Tags: , , ,
Posted in dll errors | 1 Comment »

Winlogon.exe Application Error – Please Help Me?

February 27th, 2010

Everytime i switch on my computer i get this error notification – “The instruction at 0*00000000 referenced memory at 0*00000000. The memory could not be read.
It doesn’t matter if i click OK or Cancel, my computer reboots and i get the same message again.
I tried to find a solution online. Even downloaded a registry repair software and fixed 700+ errors. But this one still persists. The instructionson microsoft.com are either useless or too complicated to understand. Will i have to reinstall Windows XP? I think i’ll lose all my data if i do that, right? Is there anyother way to fix this problem?

Tags: , , , ,
Posted in exe errors | 1 Comment »

Computer Problems Keep Getting Message?

February 27th, 2010

My computer will not come on this is the error message i get, cannot get into the safe mode. What should i do. Tried to restore it will not let me do that either…any suggestions. Thanks in advance.
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you’ve seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as a caching or shadowing. If you need to use safe Mode to remove or disable components, restart your computer, press F8 to select Advanced start up options, and then select safe mode.
Technical information:
*** STOP:0×0000008E (oxC0000005, 0xF1D5E86E, OxEF665650, 0×00000000)
*** CMDMON.sys- Address F1D5E86E base at F1D5E000, DateStamp 4 5bc9111
Beginning dump of physical memory dump complete
Physical memory dump complete
Contact your system administrator or technical support group for futher assistance.

Tags: , , , ,
Posted in sys files | 3 Comments »

How Can I Fix My Computer. It Can’t Find Magcore.dll?

February 27th, 2010

Is there some way to fix this for free. I may have deleted it by accident

Tags: , , ,
Posted in dll errors | 3 Comments »

How Do I Fix Iexplore.exe Application Error 0×623068e0 Memory?

February 27th, 2010

Install Mozilla Firefox 2.0 (free of charge) and try again – and enjoy a better browser

Tags: , , , ,
Posted in exe errors | 2 Comments »

I Cant Install Directx 9.0c.the Installation Fails Each Time. I’ve Run Dxdiag, And It Says Directx Not Found.?

February 27th, 2010

Whats strange is that I’m using programs that require Directx 9c. I suspect that it might be installed but is somehow not showing in Dxdiag. Under the files tab in DXdiag is says “The file gcdef.dll is an old version, which could cause problems.” I imagine updating Directx should fix this, I hope, but as I mentioned I am unable to install 9.0c. It fails each time and says “An internal system error has occured. Please refer to dxerror.log and directx.log in your Windows folder to determine the problem” I will include my dxdiag report as well as the directx.log if that helps. I want to solve this issues because I believe problems with directx are preventing me from installing updated gfx card drivers, which I badly need. If anyone can help, I would be so very appreciative. Please include links to sites, etc. that I can browse to for help/info. I’ve looked all over on the web searching for almost every directx term/error I can think of, and thus far Ive had little (none) success. Thanks=)
DxDiag report:
——————
System Information
——————
Time of this report: 10/1/2009, 05:52:52
Machine name: AEGIS
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
Language: English (Regional Setting: English)
System Manufacturer: n/a
System Model: n/a
BIOS: Award Modular BIOS v6.0
Processor: Intel(R) Celeron(R) CPU 2.40GHz
Memory: 2048MB RAM
Page File: 431MB used, 3512MB available
Windows Dir: C:\WINDOWS
DirectX Version: Not found
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
————
DxDiag Notes
————
DirectX Files Tab: The file gcdef.dll is an old version, which could cause problems.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
——————–
DirectX Debug Levels
——————–
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
—————
Display Devices
—————
Card name: ATI Radeon HD 3850
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter AGP (0×9515)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9515&SUBSYS_002817…
Display Memory: 512.0 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6869 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/3/2008 17:40:50, 311296 bytes
WHQL Logo’d: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 10/3/2008 18:29:30, 3331584 bytes
Device Identifier: {D7B71EE2-D655-11CF-E26E-2220A1C2CB35}
Vendor ID: 0×1002
Device ID: 0×9515
SubSys ID: 0×00281787
Revision ID: 0×0000
Revision ID: 0×0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_A ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
————-
Sound Devices
————-
Description: SoundMAX D

Tags: , , , , , , , , ,
Posted in sys files | 1 Comment »

How Can I Fix A Dll Problem ? Or What Progam Is Useful For This Kind Of Computer Problem ?

February 27th, 2010

Rundll32 ? its messes up my comp.

Tags: , , , , , ,
Posted in dll errors | 5 Comments »

Rundll32.exe Process Opening With Error Message Sound But No Error Message.?

February 27th, 2010

Rundll32.exe process opening with error msg sound but no error msg.?
I keep getting an error message sound… and I have noticed whenever this occurs, rundll32.exe is open in my processes. Recently I had a virus (Trojan.Vundo.H) which was removed by using Malwarebytes’ anti-malware. I have scanned my computer with Nod32, Kaspersky, Spybot Search&Destroy, and lavasoft ad-aware. They all come up clean so I know my computer is not infected anymore. I was wondering if there’s a way I could check what is opening rundll32.exe and giving me this error msg sound with no error msg, or if anyone else has experienced anything similar. P.S. please don’t recommend another antivirus because my computer is clean !

Tags: , , , , , ,
Posted in exe errors | 1 Comment »

I Cant Install Directx 9.0c.the Installation Fails Each Time. I’ve Run Dxdiag, And It Says Directx Not Found.?

February 27th, 2010

Whats strange is that I’m using programs that require Directx 9c. I suspect that it might be installed but is somehow not showing in Dxdiag. Under the files tab in DXdiag is says “The file gcdef.dll is an old version, which could cause problems.” I imagine updating Directx should fix this, I hope, but as I mentioned I am unable to install 9.0c. It fails each time and says “An internal system error has occured. Please refer to dxerror.log and directx.log in your Windows folder to determine the problem” I will include my dxdiag report as well as the directx.log if that helps. I want to solve this issues because I believe problems with directx are preventing me from installing updated gfx card drivers, which I badly need. If anyone can help, I would be so very appreciative. Please include links to sites, etc. that I can browse to for help/info. I’ve looked all over on the web searching for almost every directx term/error I can think of, and thus far Ive had little (none) success. Thanks=)
DxDiag report:
——————
System Information
——————
Time of this report: 10/1/2009, 05:52:52
Machine name: AEGIS
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
Language: English (Regional Setting: English)
System Manufacturer: n/a
System Model: n/a
BIOS: Award Modular BIOS v6.0
Processor: Intel(R) Celeron(R) CPU 2.40GHz
Memory: 2048MB RAM
Page File: 431MB used, 3512MB available
Windows Dir: C:\WINDOWS
DirectX Version: Not found
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
————
DxDiag Notes
————
DirectX Files Tab: The file gcdef.dll is an old version, which could cause problems.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
——————–
DirectX Debug Levels
——————–
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
—————
Display Devices
—————
Card name: ATI Radeon HD 3850
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter AGP (0×9515)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9515&SUBSYS_002817…
Display Memory: 512.0 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6869 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/3/2008 17:40:50, 311296 bytes
WHQL Logo’d: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 10/3/2008 18:29:30, 3331584 bytes
Device Identifier: {D7B71EE2-D655-11CF-E26E-2220A1C2CB35}
Vendor ID: 0×1002
Device ID: 0×9515
SubSys ID: 0×00281787
Revision ID: 0×0000
Revision ID: 0×0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_A ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
————-
Sound Devices
————-
Description: SoundMAX D

Tags: , , , , , , , , ,
Posted in sys files | 1 Comment »

How To Fix Kernel32.dll Error (entry Point Not Found)?

February 26th, 2010

“( Launcher.exe – Entry Point Not Found )The procedure entry point MakeCriticalSectionGlobal could not be located in the dynamic link library KERNEK32.dll.”
this shows up whenever i log-in in Ran Online. Can someone help me how to fix this problem?
We already have kernel32.dll in system32 folder. Please in need you help!

Tags: , , , ,
Posted in dll errors | 1 Comment »

« Older Entries
Newer Entries »