I have a Gateway MX3230 With 1.5 Ghz and 256 RAM. It use to run Perfectly Fine up until maybe 2 weeks ago. It Shutdown After something blue pop ed up. Then It restarted and same thing happened Before i could see the desktop. I restored it with a brand new Restore disk, but it Freezes up on certain things then after 3-4 days the blue message saying memory dump happens again. I restored and tried Error reading disk to see if there was something bad with the hard drive. Nothing pop ed up saying anything wrong with it. So then 1 day later i tried to install Service pack 3 in which it failed to install. Then the computer would not reboot after the windows XP loading screen. So i restored again. I have installed XP pro with sp1 and it ran fine but for some reason it would mess up when i tried to install my video acceleration driver from gateway updates. It would say Installshield could not work errorssomethingg somthing. So i restored with Gateway disk sense XP pro was not helping at all. Now when i try to restore it keeps saying it could not find certain files. Which when i try to restore over and over again it says it cant find different files each time. But i found out that i could find the files in system32. So i did that and it did fine the after its all done with 65/65 patches a screen comes up after a programbeginningg with SYS. in which the screen says windows xp hone edition up top in the middle says please wait bottom it says like copyright. So the computer seems to be doing somthing sense the light for when the hard drive is being used flashes, But it stays that way i left it for 8 hours. So i restarted the pc and a popup comes up saying the system is not fully installed. so i click ok and system rebbots and same error comes up. Can anywon help me?
Archive for the ‘sys files’ Category
I Need Help With Gateway Mx3230?
Saturday, February 20th, 2010Help! Sound Card Issues.?
Friday, February 19th, 2010I’ve just downloaded the Dell 1501 Sigmatel sound driver for XP SP2, and it tells me, after I’ve unzipped it, “Exit error: error: Device Object not present. Please restart system and try again.”
But I’ve restarted four times. Please help?
Here is my system info:
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Build 2600
OS Manufacturer Microsoft Corporation
System Name AMY
System Manufacturer Dell Inc.
System Model Inspiron 1501
System Type X86-based PC
Processor x86 Family 15 Model 76 Stepping 2 AuthenticAMD ~1795 Mhz
BIOS Version/Date Dell Inc. 1.4.0, 11/14/2006
SMBIOS Version 2.4
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\System32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = “5.1.2600.0 (xpclient.010817-1148)”
User Name AMY\am
Time Zone Eastern Standard Time
Total Physical Memory 512.00 MB
Available Physical Memory 103.83 MB
Total Virtual Memory 1.47 GB
Available Virtual Memory 674.11 MB
Page File Space 1.03 GB
Page File C:\pagefile.sys
(I am very nearly computer-illiterate, so a for-idiots answer would be appreciated.)
Computer Suddenly Stopped-indicating 96 Degrees Cent Temp?
Friday, February 19th, 2010THE CPU AND SYSTEM FANS ARE RUNNING WELL-BIOS INDICATING 96 DEGREES CENTIGRATE TEMP–SYS FAN FAILURE ALARM WARNING- SUDDENLY STOPPING-OR SUDENLY REBOOTING? WHY — PL SUGGEST REMEDY-THE ERROR LOG SHOWS THAT THE SMART LINK ENTERED THE STOPPED STATE?-WHAT DOES IT MEAN-MECHANIC UNABLE TO ATTEND THE PROBLEM – PL SUGGEST REMEDY
Help. (blue-screen Errror, Virus, Slow Comp)!!!!!?
Friday, February 19th, 2010Few days ago i got my computer formatted (as there was virus) After that i day my comp suddenly turned off. It turned out to be a Blue screen error. So i downloaded kaspersky anti-virus 2009. It found a virus( while running full scan for the third time in a row) called Trojan.Win32.Agent.avcy but couldn’t repair it so i told it to delete it.
But after doing a full scan two more times it again found the virus in a different place.(Has found the virus 5 times in total – every time in a different place.) So According to the suggestion given in yahoo answers by some people I ran a full sys scan in safe mode.But it found nothing. Today i find comp really slow . So here i am in ’safe mode with networking’ mode typing this lengthy biography of my comp desperately asking for help.
plllllllllls help me
Also when i am not in safe mode blue screen error occurs almost every 30 min. And i currently have E NOD 32 and kaspersky internet security 2009(updating).So once agiain heelllllllp meeeeeeeee.!!!
Can Anyone Please Rewrite These Steps To Hack A Nintendo Wifi Usb Connector To A 13 Year Old?
Thursday, February 18th, 2010I really can’t understand what to do and how to do it so i am asking if anyone would actually rewrite this in a way a 13 year old can understand step by step.Here it is.I copied and paste this.
Ok. If you are an owner of a DS and a PSP and you only have a Nintendo Wifi USB Connector to connect to the internet with you can use this tutorial to change your Nintendo Wifi USB Connector in to a SoftAP so you can connect online with any other devices like a PSP.
To do this you need to have this rar file:http://www.megaupload.com/?d=S4VLBP9A
or you can get it from here:http://www.linfoxdomain.com/nintendo/ds/…
You can also watch a video of me installing the Nintendo Wifi USB Connector if you dont feel like reading.http://www.megaupload.com/?d=31QXFFP2
Then follow these steps:
1)
If you want to use the official Nintendo Wi-Fi USB Connector as a standard SoftAP make sure you have removed the Nintendo software and drivers as they will no longer be needed.
2)
Inside the Drivers folder of the RAR file, you will find modified Buffalo drivers. Install these drivers for the USB Connector. Then install the ASUS software (also in RAR file(eng_2371.zip)). When it prompts you to restart, select No. I have found that there is no need to.
3)
Now in the ASUS EXEs folder of the RAR file, extract the six EXE files in the into the ASUS folder (C:\Program Files\ASUS\WLAN Card Utilities). Make sure you overwrite the existing files.
4)Then click Start -> All Programs -> ASUS Utility -> WLAN Card -> ASUS WLAN Control Center. You will get a dialog asking if you want to use the Windows configuration utility or the ASUS one, select the option that uses ASUS one and disables the Windows one. Then there will be a wizard. Click Cancel to close the wizard.
5)
Now copy the file (C:\Program Files\ASUS\WLAN Card Utilities\Driver\WinXP\AP\rt2500usb.sys) to (C:\WINDOWS\system32\drivers). Make sure you overwrite the existing file.
6)
Right-click on the ASUS software icon in the System Tray (bottom-right corner of screen) and select Wireless Settings. When the settings dialog opens, on the left select Config, then go to the SoftAP tab, and select Soft AP Mode. Then un-tick the Enable ICS checkbox. Then on the left click Apply. You will get a message box asking if you really want to change to SoftAP mode, click Yes. A message will come up saying something like “add the adapter to the network bridge”, just ignore it and click OK. If all has gone well, there will be no error messages. Now close the ASUS Wireless Config utility or it will start conflicting when we manually set ICS.
7)
Now go to Control Panel -> Network Connections (this may have opened automatically opened up when you Applied the SoftAP settings). Right-click on the Network Adapter you are currently accessing your Internet through (or your internet connection icon) and open the properties for that connection. Go to the Advanced tab, and click “Allow other network users to connect through this computer’s Internet connection”. Then click OK. If you get an error message saying the IP address is already in use, disable the Network adapter you are trying to share then try again – be sure to enable it again afterwards. It can take a long time for ICS to be enabled so wait patiently.
Now right-click on the Wireless Network Connection and click Properties. In the middle of the dialog there will be some protocols, select Internet Protocol (TCP/IP) and then open the properties for that. Windows would have assigned a static IP address if ICS was successfully enabled, check to make sure this IP address does not conflict with other IP addresses on your network. Also, it should be on a different subnet to the Local Area Connection (for example, my computer’s IP address is 192.168.0.2, I assigned the wireless network connection the IP address of 192.168.1.1 – which is on a different subnet). If it is on the same subnet, ICS will not work correctly.
***9)***
With that done, open the ASUS Wireless Config utility again. On the left select Config, in the Basic tab set a SSID. In the encryption tab, select Shared for Network Authentication and WEP for Data Encryption – I have found that this works with the DS. Now enter a WEP key. Go back to the Basic tab, and at the bottom click on Advanced, change the 54g Mode setting to 802.11b only. Click Apply on the left to save the settings.
10)
Now turn on your DS, play a Wi-Fi Connection game, go to the Nintendo WFC Settings, and select Manual Setup. Enter the SSID and WEP Key (both of these are case-sensitive) you entered to the ASUS Config utility before. Select No to Auto-obtain IP Address (you must do this because the Nintendo DS doesn’t seem to DHCP correctly with ICS for some reason). Now give your DS an IP Address (this must be on the same subnet as the USB connector, I gave my DS the IP address: 192.168.1.2). For subnet mask enter 255.255.255.0. For gateway and primary DNS, enter the IP address of the USB connector. Now try and test connection, and if all has gone well the connection should be successful!
11)
Now with the ASUS Wireless Config utility, hide your SSID, and use MAC Address filtering to improve the security of your wireless access point.
12)
You now have an Official Nintendo Wifi USB Connector that can connect online with any other devices. 
Help!!!!!!!!!!!!!!!!! This Is Very Important!?
Thursday, February 18th, 2010I got a error on my pc. I done a update on my pc and when it was done it wanted to go to the net and a thing came up saying that there was an error. It wanted me to go to netgear.com cause thats where the problem is.
Netgear Ethernet (fa312nd.sys)
Isnt “ethernet” the internet? Should I take that program off my pc cause it showed me how, but I dont want to remove my internet! 
Thanks for your time and answers! 
Help With Computer Crash?
Wednesday, February 17th, 2010Hi,
I keep getting the blue screen when I try to load my computer through normal settings. It crashes with a blue screen at the “Windows Vista” loading screen with the bar, and then restarts, and then repeats. This was after I used System Mechanic to “optimize” my system by compressing the registry, optimising memory useage and defragmenting the drive (although I cancelled defragmentation mid-way). It keeps crashing over and over, or loads the desktop with just a black screen. When I try to use the Task Manager, it tells me that the application failed to initialize.
The error message that I’m getting on the blue screen is:
“disk.sys
DISK_FAULT_IN_NONPAGED_AREA”
It then does a “memory dump” before restarting, and doing the same thing over and over.
I have Hiren’s Boot CD 9.8, but I don’t know which programs to use to get it back. I’d like to try some methods rather than factory resetting my computer.
Can anyone help? Or suggest programs to use on Hiren’s Boot CD? Or even any alternate suggestions?
Thank you in advance.
NOTE: I posted up this question before, but I wanted to add more details. Just to make this clear, I cannot use System Restore because it was turned off prior to a previous virus attack. Also, starting the computer using the “Last Known Good Configuration” doesn’t seem to help. Right now, I can only load it in Safe Mode.
Bsod!!! I Need Help Now!!!!?
Tuesday, February 16th, 2010ok so i’m just surfing the internet and all of a sudden BAM! blue screen of death with the error message
DRIVER_IROL_NOT_LESS_OR_EQUAL
Tech information
*** Stop: 0×000000D1 (0×000005A8, 0×00000002, 0×00000001, 0xBA319D9B
***Wenarp.sys – adress BA319D9B base at BA3180000, Datestamp 41107089
and some stuff about improperly installed software (but I dont remember downloading anything recently!!!)
I have a Dell Inspiron E1505 windows XP media center edition version 2002
I am a total computer noob!!!!! I need help!!! i’ve already tried the solutions that come up when I google the error message! Thank you!!
Haywire Xp And “0×98122b90″ How Can I Fix It?
Tuesday, February 16th, 2010Every time I try to open some programs in XP i get an error message saying “The instruction “0×98122b90″ referenced memory at “0×98122b90″. The Memory could not be “read”.
Also I tried repairing windows XP and it had ay56618y.sys missing the first time so I tried my other version and that had ack01lip.sys missing. Its just acting odd and not working, some web pages make firefox crash and everytime i try to download a torrent file it crashes.
I recently has virtumonde virus on my comp and i may have deleted a dll?
When I Play Battlefield 2 And 2142 I Get Blue Screen?
Monday, February 15th, 2010i get the blue screen of death whenever i play online on battlefield 2 and battlefield 2142 the blue screen says this:
A problem is been detetcted and window has been shut down
driver_IRQL_NOT_LESS_OR_EQUAL
if this is the first time you have seen this stop error screen restart your computer
if this screen appears again follow these steps
check to make sure any new hardware or software is properly installed if this is a new instalation ask your hardware or
software manufacture for any windoews updates you might need
if problems continue disable or remove any newly installed hardware or software
disable bios memory options such as catching or shadowing
if you need to use safe mode to remove or disable computers restart your computer press f8 to select advanced startup
options and then select safe mode
tecnical infomation
*** STOP: 0×000000001 (0xB7558DB8,0×0000002, 0×00000008, 0xB7558DB8)
= viahduaa-sys – address B7558DB8 base at B7541000,DATASTAMP 47b3b73D
= viahduaa-sys – address B7558DB8 base at B7541000,DATASTAMP 47b3b73D
begining phisical memory
phisical memory dump complete.
contact your system administrator or technical support group for further assistance.
can someone please tell me what i need to do to stop it or some suggestions thanks