Whats strange is that I’m using programs that require Directx 9c. I suspect that it might be installed but is somehow not showing in Dxdiag. Under the files tab in DXdiag is says “The file gcdef.dll is an old version, which could cause problems.” I imagine updating Directx should fix this, I hope, but as I mentioned I am unable to install 9.0c. It fails each time and says “An internal system error has occured. Please refer to dxerror.log and directx.log in your Windows folder to determine the problem” I will include my dxdiag report as well as the directx.log if that helps. I want to solve this issues because I believe problems with directx are preventing me from installing updated gfx card drivers, which I badly need. If anyone can help, I would be so very appreciative. Please include links to sites, etc. that I can browse to for help/info. I’ve looked all over on the web searching for almost every directx term/error I can think of, and thus far Ive had little (none) success. Thanks=)
DxDiag report:
——————
System Information
——————
Time of this report: 10/1/2009, 05:52:52
Machine name: AEGIS
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
Language: English (Regional Setting: English)
System Manufacturer: n/a
System Model: n/a
BIOS: Award Modular BIOS v6.0
Processor: Intel(R) Celeron(R) CPU 2.40GHz
Memory: 2048MB RAM
Page File: 431MB used, 3512MB available
Windows Dir: C:\WINDOWS
DirectX Version: Not found
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
————
DxDiag Notes
————
DirectX Files Tab: The file gcdef.dll is an old version, which could cause problems.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
——————–
DirectX Debug Levels
——————–
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
—————
Display Devices
—————
Card name: ATI Radeon HD 3850
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter AGP (0×9515)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9515&SUBSYS_002817…
Display Memory: 512.0 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6869 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/3/2008 17:40:50, 311296 bytes
WHQL Logo’d: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 10/3/2008 18:29:30, 3331584 bytes
Device Identifier: {D7B71EE2-D655-11CF-E26E-2220A1C2CB35}
Vendor ID: 0×1002
Device ID: 0×9515
SubSys ID: 0×00281787
Revision ID: 0×0000
Revision ID: 0×0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_A ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
————-
Sound Devices
————-
Description: SoundMAX D
Archive for February, 2010
I Cant Install Directx 9.0c.the Installation Fails Each Time. I’ve Run Dxdiag, And It Says Directx Not Found.?
Saturday, February 27th, 2010How Can I Fix A Dll Problem ? Or What Progam Is Useful For This Kind Of Computer Problem ?
Saturday, February 27th, 2010Rundll32 ? its messes up my comp.
I Cant Install Directx 9.0c.the Installation Fails Each Time. I’ve Run Dxdiag, And It Says Directx Not Found.?
Saturday, February 27th, 2010Whats strange is that I’m using programs that require Directx 9c. I suspect that it might be installed but is somehow not showing in Dxdiag. Under the files tab in DXdiag is says “The file gcdef.dll is an old version, which could cause problems.” I imagine updating Directx should fix this, I hope, but as I mentioned I am unable to install 9.0c. It fails each time and says “An internal system error has occured. Please refer to dxerror.log and directx.log in your Windows folder to determine the problem” I will include my dxdiag report as well as the directx.log if that helps. I want to solve this issues because I believe problems with directx are preventing me from installing updated gfx card drivers, which I badly need. If anyone can help, I would be so very appreciative. Please include links to sites, etc. that I can browse to for help/info. I’ve looked all over on the web searching for almost every directx term/error I can think of, and thus far Ive had little (none) success. Thanks=)
DxDiag report:
——————
System Information
——————
Time of this report: 10/1/2009, 05:52:52
Machine name: AEGIS
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.090206-1234)
Language: English (Regional Setting: English)
System Manufacturer: n/a
System Model: n/a
BIOS: Award Modular BIOS v6.0
Processor: Intel(R) Celeron(R) CPU 2.40GHz
Memory: 2048MB RAM
Page File: 431MB used, 3512MB available
Windows Dir: C:\WINDOWS
DirectX Version: Not found
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.5512 32bit Unicode
————
DxDiag Notes
————
DirectX Files Tab: The file gcdef.dll is an old version, which could cause problems.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
——————–
DirectX Debug Levels
——————–
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
—————
Display Devices
—————
Card name: ATI Radeon HD 3850
Manufacturer: ATI Technologies Inc.
Chip type: ATI display adapter AGP (0×9515)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_9515&SUBSYS_002817…
Display Memory: 512.0 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6869 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/3/2008 17:40:50, 311296 bytes
WHQL Logo’d: n/a
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 10/3/2008 18:29:30, 3331584 bytes
Device Identifier: {D7B71EE2-D655-11CF-E26E-2220A1C2CB35}
Vendor ID: 0×1002
Device ID: 0×9515
SubSys ID: 0×00281787
Revision ID: 0×0000
Revision ID: 0×0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_A ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0×3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
————-
Sound Devices
————-
Description: SoundMAX D
How To Fix Kernel32.dll Error (entry Point Not Found)?
Friday, February 26th, 2010“( Launcher.exe – Entry Point Not Found )The procedure entry point MakeCriticalSectionGlobal could not be located in the dynamic link library KERNEK32.dll.”
this shows up whenever i log-in in Ran Online. Can someone help me how to fix this problem?
We already have kernel32.dll in system32 folder. Please in need you help!
Logonui.exe – App Error?
Friday, February 26th, 2010I recently had a virus and now i can’t start up my computer. I get a black screen and an error pops up, “The instruction at 0×00a8020d referenced memory at 0×00a8020d. The memory cannot be written”
When I click ok it terminates the error and then about a half a second later the error re pops up.
I can access my task manager and that’s it.
BTW, I’m on another computer of mine. Please help
Thanks!
What Are Some Windows Xp Themes That Do Not Require The Uxtheme.dll Patch?
Friday, February 26th, 2010I would like to find a Windows Vista theme for XP but I want one that I don’t have to have the patch for. Because I hate using that. Anyone got any ideas….?
Hi Guys! Help Me To Fix Warcraft 3 Because The Error Is Not Find War3.exe In The Cd-rom?
Friday, February 26th, 2010after install my warcraft cd is complete no problem error but after update to battle net then restart to finnish then i start to play i click icon the warcraft the happen is not running… because not find the cd of warcrft but i have …
Can Someone Upload Audiere.dll File For Me, It Says I’m Missing It When I Try To Play Rappelz?
Friday, February 26th, 2010Just send me the link if you can find where the right place to get it at is, or if you and get it yourself or something. And is there anyway to fix this error?
I M Facing An Error “avlc.exe Has Encountered A Problem And Needs To Close. We Are Sorry For The Inconvenienc?
Friday, February 26th, 2010My cursor shows processing all the time and suddenly the above message comes. and when i reboot windows cannot boot properly some application are left to be booted and processing is shown regularly. plz help